3
Kreepy Krauly
®
Platinum
™
Installation and User’s Guide
Booster Pump Installation
If you already have a 3/4 horsepower booster pump installed at your equipment pad
and it is operational, skip this section and proceed to “
Installing the Twist Lock
Pressure Relief Valve (Wall Fitting)”
.
Detailed booster pump installation instructions are packaged separately in our
booster pump box.
Please follow these instructions carefully
.
The booster pump is not self-priming and needs to be fed with water taken from the
pool fi lter before any type of in-line chlorinator. See illustration below.
Pool Connections
• The
Kreepy
Krauly
®
Platinum
™
comes equipped to connect to a female threaded
1-1/2 in. line, dedicated to our Universal Booster Pump.
•
If the pool doesn’t have a dedicated cleaner line please contact our Technical Support
Department at 1-800-831-7133.
Installing the Twist Lock Pressure Relief Valve (Wall Fitting)
1. Take out any existing pool cleaner and/or
wall fi tting.
2. Turn on the fi ltration pump and booster pump,
fl ush out the plumbing line.
3. Turn off fi lter pump and booster pump.
4. Remove the Wall Adapter from the Wall Fitting
and screw Adapter by hand into the dedicated
line. Turn until tight.
5. Take the Wall Fitting and Twist Lock the Wall
Fitting into the Wall Adapter 1/4 turn and pull
out, to a snug fi t.
Once the Wall Adapter is secure, you can now
twist lock and unlock to remove Wall Fitting with
ease from the Wall Adapter.
Wall Adapter Installed
Quick Disconnect
O-Ring
Quick
Lock Peg
FROM
POOL
FILTER
PUMP
POOL
FILTER
HEATER
SOLAR
SYSTEM
CHLORINATOR
TO
POOL
BOOSTER PUMP
Содержание Kreepy krauly Platinum LL505PM
Страница 8: ...Blank Page vi Kreepy Krauly Platinum Installation and User s Guide ...
Страница 26: ...18 Kreepy Krauly Platinum Installation and User s Guide NOTES ...
Страница 27: ...NOTES SAVE THESE INSTRUCTIONS ...
Страница 28: ...P N 370404 Rev A 9 21 11 370404 ...