QUANTUM INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
16
.
d)
Connect the brine line to the float in the brine well cylinder.
i.
Run the brine line tubing through the small hole near top of the brine tank.
ii.
Attach the plastic nut and insert the plastic sleeve into the tubing end.
iii.
Only hand tighten the brine line nut to the float assembly.
The brine tank setup is complete.
OPTIONAL WHOLE HOUSE FILTER SETUP
2)
Setup an optional whole house filter (i.e. pH neutralizer, iron filter, etc.).
(*If not purchased, skip to the next
step.)
ATTENTION:
Whole house filter is pre-loaded with media.
Note:
Larger filters will come with additional media to be loaded*. The following steps will guide you. (*If no
additional filter media was provided, your filter tank is already loaded with the appropriate amount of media.)
