Pentagram P 6122-20, Инструкция по эксплуатации

Страница: 15 / 24

horNET Wi-Fi USB 9dBi (P 6122-20)
15
Network Tab
This Tab enables searching for and connecting to active wireless networks.
Icons on list means:
Connection to this network established successfully
Connection to this network not established
Infrastructure type network
Ad hoc type network
802.11 standards supported by wireless station
Access Point supports WPS function and it’s enabled
Secured network
Show dBm – Select this box, to show signal Strength on AP List as dBm instead of
percentages. This also applies to Signal Strength and Noise Strength in secondary pane.
AP List – List of wireless networks in range. Columns contains as follows: SSID (hidden when
SSID Broadcast on AP is disabled), network type icon (Infrastructure or Ad hoc) and used
channel, supported 802.11 standards (i.e. 802.11g), security and signal strength. Double-click
on network, to display Detailed network information in secondary pane.
Rescan – Click this button to rescan for available wireless networks.
Add to Profile – Click to create a profile for selected network. You can find detailed
information on profile configuration in previous section.
Connect – Click to connect do selected network without creating a profile. Connection
configuration will be displayed in secondary pane. Options correspond to options from profile
configuration. You can find detailed information on profile configuration in previous section. If
selected network doesn’t broadcast SSID, after clicking
Connect button you will be asked to
enter SSID. Enter SSID in Please enter SSID field in secondary pane and click OK , to
continue connection configuration.