Pentagram P 2700, Инструкция по установке и эксплуатации

Страница: 30 / 64

PENTAGRAM Designer (P 2700)
Tablet installation
To install the tablet properly, perform the following steps. The tablet drivers are meant for
Windows 2000, XP, Vista and 7 operating systems. It is recommended to install the drivers prior
to connecting the tablet to the computer.
1. Insert the supplied DVD/CD into the optical drive in the computer.
2. The DVD/CD start menu will display (in Windows Vista and 7 systems, you may have to
additionally click the Run: setup.exe button in the Autoplay window).
3. If the menu window does not start automatically, select menu Start > Run (in Windows
Vista and 7 systems: Start > All programs > Accessories > Run). In the Open field of the
Run window, enter
X:\setup
(where
X
is the optical drive letter) and press Enter.
4. In the menu window, click Tablet Driver to launch the drivers and application installer.
5. Follow the on-screen instructions to install the drivers and Macro Key Manager application.
6. After the installation, the dialog window will display, asking you to reboot the computer.
Close all open applications and click OK.
7. When the computer reboots, connect the included USB cable to the tablet and a free USB
port of the computer, and wait for the system to install the tablet.
8. Check if all the tablet functions operate properly. Moving the pen above the tablet surface
should cause the cursor movement on the screen.
8
EN