Pentagram horNET Giga PCI, Инструкция по установке и эксплуатации

Страница: 6 / 16

horNET Giga PCI (P6111-1)
6
Features
•
One port with automatic MDI/MDI-X switching, enabling the card to be connected quickly
to a switch or another computer.
•
Jumbo Frames support to ensure high performance in new applications which require
large frame transfers (graphics and video editing applications).
•
Auto-negotiation: speed (1000/100/10 Mbps) and full duplex/half duplex.
•
Support for back-pressure (half-duplex) and IEEE802.3x (duplex) flow control to prevent
errors when transmitting and receiving data at different speeds.
•
Status LEDs for quick network operation diagnostics.
•
Full duplex support to double the effective network bandwidth.
•
Wake-on-LAN (for PCI 2.2).
•
32-bit PCI Bus Master support for high performance at low CPU load.
•
PCI 2.1 and PCI 2.2 compliance.
•
Automatic IRQ (interrupt request) and I/O (input/output) address configuration.
Technical specifications
Data rate 10 Mbps, 100 Mbps, 1000 Mbps (autonegotiation)
Transfer mode
10/100 Mbps half-duplex, full duplex (autonegotiation)
1000 Mbps duplex
Standards supported
•
IEEE 802.3: 10Base-T
•
IEEE 802.3u: 100Base-TX
•
IEEE 802.3ab: 1000Base-T
•
IEEE 802.3x: flow control support with full duplex
•
IEEE 802.1p: Layer 2 QoS
•
IEEE 802.1q: Virtual LAN (VLAN) Tag and Jumbo
Frame support
Interface
One shielded RJ-45 connector with automatic crossover
sensing (Auto MDIX)
System bus PCI version 2.2
Cabling and connectors
RJ-45 (10Base-T): UTP Cat. 3, 4 or 5
RJ-45 (100Base-TX): UTP Cat. 5
RJ-45 (1000Base-T): UTP Cat. 5
Status LEDs Two connection activity LEDs: 1000 Mbps and 10/100 Mbps
Operating temperature 0 to 45°C (32 to 113°F)
Humidity 5-95% (non-condensing)