6
SETTINGS EXPLANATION :
There is separate and fast arrangement for setting power factor and
dead band.
SET PF :
Press `SELECT/ENTER` and `UP` key simultaneously at least
for 4 seconds, the screen is refreshed by `PF`, now release the keys, last
saved pf along with lag or lead indication displays on screen and blinks,
now press the UP or DN key to increase or decrease the set power factor,
to save the value release the key and press SELECT/ENTER, screen will
refreshed by `don`, the value is saved.
Range - 0.80 lag ---- 1.00 ---- 0.80 lead
Default set value - 1.00 lead
DEAD BAND :
Press `SELECT/ENTER` `DN` key simultaneously at
least 4 seconds, screen is refreshed by `dbn`, now release the keys the last
saved dead band displays on screen and blinks, now press the UP or DN
key to increase or decrease the dead band, to saved value release the key
and press SELECT/ENTER, screen will refreshed by `don`. The value is
saved.
Range - 1 to 5
Default set value - 2
Settings of Variables :
For setting the variables press the key
`SELECT/ENTER`, `SEt` displays on screen. Release the key first`S.dL`
will comes on screen, that is step delay now press the key `UP` or `DN`to
change the parameters, release the key when desire parameter comes to
set. Now press the `SELECT/ENTER` key, the value of the parameter would
display on screen, press `UP` or `DN` key to increase or decrease the value.
After setting again press the`SELECT/ENTER` key to save the new value.
Display would be refreshed by `don`. The new value is saved.
