2-6
WorldPenScan Series
New WorldPenScan software provides the feature of connecting WorldPenScan X with
Mac via Bluetooth. If your Mac supports Bluetooth 4.0 BLE, you can now use WorldPen-
Scan X on it without connecting USB cable. Please refer to the steps below to check your
Mac supports Bluetooth 4.0 BLE or not:
1. Click
the
menu, and select [About This
Mac
].
2. In the [Overview] page, make sure your system is Mac OS X 10.7 or above, then
click on [System Report...] button.
3.
Select [Hardware] > [Bluetooth] from the sidebar on the left, then find
[LMP Ver-
sion] on the right.
4. If your Mac is equipped with Bluetooth 4.0 BLE, LMP Version will say (0x6) or
higher, like (0x7). Anything lower than (0x6) means your Mac doesn’t support
Bluetooth 4.0 BLE.
2. At this time there will be a hardware connection confirmation window appears, please
click [OK].
Turn on WorldPenScan X and click
[Connect]
button; system will start searching and
connecting automatically, once the system prompt connect success, please click
[OK]
but-
ton to finish, and now you can start to scan.
