Penny Hydraulics SwingLift CC, Руководство по эксплуатации и техническому обслуживанию

Страница: 26 / 57

Penny Hydraulics Ltd
Operating & Maintenance Manual – VME - SwingLift Cranes KJ, ML, F500, FV500, CC, MC & GBC
26
Technical Data – KJ Series
Electrical Specification - all models utilise the same type of winch in 12 volt or
24 volt form.
12 volts DC 70A
24 volts DC 35A
110 and 240 volt – Contact Penny Hydraulics Ltd for more information.
Winch Operating Temperature
A range of -
5
° C to
30
° C for both 12 Volt and 24 Volt winches.
Winch Duty Cycle
1 minute of continuous running within a 15 minute period for both 12 Volt and
24 Volt winches.
Typical Weights
SwingLift KJ250 32.5kg – 100kg subject to specification including winch unit.
Maximum Working Load
Each SwingLift KJ250 is marked individually with its maximum working load.
Noise Levels
A survey sheet giving full details is available on request. Briefly, the results are
as follows:
Winch running 65dB(A)
These levels are well below those at which hearing can be damaged and below
levels at which action is required under the noise at work regulations.
COSHH – Terminal Disposal
Penny Hydraulics will remove and dispose of the entire crane in an
environmentally sound manner when required.