in center of unit. Discoloration and staining of wheel
segment does not affect its performance. Only
excessive buildup of foreign material need be
removed. If the segment appears excessively dirty, it
should be cleaned to ensure maximum operating
efficiency. Thoroughly spray plastic surface with
household cleaner such as Fantastic® or equivalent or
middle detergent and gently rinse with warm water
using a soft brush to remove heavier accumulation.
Shake excess water from segment and replace in
reverse of removal instructions.
A - Wheel Removal (See Figure 10)
1.
Remove Filter Access panel to expose wheel.
2.
Disconnect wheel electrical harness.
3.
Carefully slide the wheel outwards.
FIL TER PUSHER
FIL TER AC CESS PANEL
FILTER
Figure 11
Figure 12
TERMINAL BLOCK
CONTROL BOX
B - Filter Removal (See Figure 11)
1.
Remove the Filter Access panel to expose filters.
2.
Remove the filter pushers.
3.
Slide filters outwards.
PAGE 6
Figure 10
WHEEL
FIL TER AC CESS PANEL
WHEEL ELEC TRI CAL HARNESS
XII - War ranty
RRS Man u fac tured Parts
In the event that defects in workmanship or materials
originate in any part manufactured by RRS, FOB point of
manufactured, we guarantee to repair or replace that part,
within three (3) months of the shipment date.
Other Sup plied Parts
Additionally, RRS guarantees to replace standard
components purchased new from a RRS vendor, (motors,
controls, etc.) that may be found defective, within twelve
(12) months of the installation date. The components
warranty, however, excludes service call charges and
labor cost for replacing or adjusting the defective part.
Lim i ta tion Of War ran ties
Misapplication, destruction, negligence or alteration
constitute the warranty and/or the components warranty of
RRS products and/or parts, null and void. This warranty is
provided in lieu of all other written, stated or implied
warranties.
C - Control Box Location (See Figure 12)
The control box is located on the bottom left hand corners
of the MV when the Filter Access Panel is removed.
