MANUAL SGM800
18
2.6
Weigher settings-
Set up the correct indicator setting (step size and decimal point position).
Turn the indicator on by connecting it to the power supply.
Press
key 3 for >2 sec. to get in to
Configuration Menu
.
(In SGM810 or controller)
Go to the Indicator parameters pressing key 1 <2 sec.
Go into the Indicator parameters pressing key 2.
Use
Ind 1
to set the
maximum net weight value
. Set maximum load to prevent
overload by the user. The indicator will not show any weight above the filled in
value. Range: 0
–
full display.
To change the value, press key 2 <2 sec.
Use key 1 and 2 to change the value. Key 1 is for changing the number (1-9), key
2 is for changing the position of the cursor. Confirm by pressing key 3 for >2 sec.
Up
Down
Left
Right
Confirm
When the maximum net weight value is set successfully, the following screen is
visible:
