Penguin Water PWXH-150, Руководство пользователя

Страница: 27 / 41

Dashboard
Parameters that can be changed are indicated with orange font. To change a parameter,
tap on the orange font then use the keyboard that appears to change the value.
1. Time of Day: Tap on the "Time of Day" box. A box will appear that allows you to set
the unit to the time that matches the device being used to program the unit. Press
"OK" and the time will change to the current time of the device.
2. Water Hardness: Tap on the "Water Hardness" box and input the water hardness of
the water being treated. This info can be found by performing a water test or by con-
tacting the municipality. If the water hardness is expressed as ppm or mg/L, it should
be converted to GPG (grains per gallon). This can be done by dividing the value giv-
en in ppm or mg/L by 17.1. This will give GPG. Once the GPG is known, add 5 GPG
to the value and input that as the water hardness.
3. Regeneration Time: Tap on the "Regeneration Time" box. Input the desired regen-
eration time for normal operation. This is typically two hours after everyone in the
house is asleep or the business is closed for the day.
27