background image

Warranty

Model Numbers Covered:

 All PWP Mod-

els

This warranty covers the Penguin Water Ul-
tra Filter System

This warranty cannot be transferred - it is
extended only to the original purchaser or
first user of the product in a residential ap-
plication. By accepting this product, you
agree to all the warranty terms and limita-
tions of liability described below. Important
Warning: Carefully read the Installation
& Operating Instructions Manual to en-
sure safe and proper care of this product.

What is covered by this warranty?

  –

 The Penguin Water Dealer warrants that at
the time of manufacture, the water treat-
ment equipment shall be free from defects
in material and workmanship as follows:

Filter housing is covered for 10 (10)
years from the date of purchase, not the
date of installation. * This warranty does
not include filters.

Additional Terms & Conditions

 –

 The Penguin Water dealer will, at its op-
tion, either make repairs to correct any de-
fect in material or workmanship or supply
and ship either new or used replacement
parts or products. Penguin Water will not
accept any claims for labor or other costs,
including subsequent or consequential
damages.

Additional Exclusions and Limitations

 -

This warranty is non-transferable and does
not cover any failure or problem unless it
was caused solely by a defect in material or

workmanship. In addition, this warranty
shall not apply:

• If the water treatment equipment is not

correctly installed, operated, re-
paired, and maintained as described in
the Installation & Operating Manual
provided with the product.

• Defects caused as a direct result of the

incoming water quality.

• To any failure or malfunction resulting

from abuse (including freezing), improper
or negligent; handling, shipping (by any-
one), etc.

• If the unit has not always been operated

within the factory calibrated temperature
limits, and at a water pressure not ex-
ceeding 100 psi, storage, use, opera-
tion, accident: or alteration, lightning,
flooding or other environmental condi-
tions.

• This warranty does not cover labor costs,

shipping charges, service charges, deliv-
ery expenses, property damage, adminis-
trative fees or any costs incurred by the
purchaser in removing or reinstalling the
water treatment equipment.

• The warranty does not cover any claims

submitted to The Penguin Water Deal-
er more than 30 days after expiration of
the applicable warranty.

THESE WARRANTIES ARE GIVEN IN
LIEU OF ALL OTHER EXPRESS WAR-
RANTIES. NO PENGUIN WATER DEAL-
ER OR ANY OTHER PARTY IS AUTHOR-
IZED TO MAKE ANY WARRANTY OTHER
THAN THOSE EXPRESSLY CONTAINED
IN THIS WARRANTY AGREEMENT.

16

Содержание 320-PWP-10 Series


















Отзывы: