Penguin Water 117-PUCF Series, Руководство пользователя

Страница: 5 / 16

Before Starting Installation
Proper Installation
This water system must be properly installed and located in accordance with the Installa-
tion Instructions before it is used or the warranty will be void.
• Do not install or store where it will be ex-
posed to temperatures below freezing or
exposed to any type of weather. Water
freezing in the system will break it. Do
not attempt to treat water over 100°F
• Do not install in direct sunlight. Exces-
sive sun or heat may cause distortion or
other damage to non-metallic parts.
• Maximum allowable inlet water pressure
is 100 psi. If daytime pressure is over 80
psi, night time pressure may exceed the
maximum. Use a pressure reducing valve
to reduce the pressure.
• System must be operated in a vertical
position. Do not lay it down during opera-
tion.
• Place the system on a smooth, level sur-
face. Because the system operates in an
UP-Flow, fluidized bed mode, having a
level surface is more important than with
a softener or media filter.
• A bypass valve should be installed on ev-
ery system to facilitate installation and
service.
• Observe all local plumbing and building
codes when installing the system.
5