Hardware Installations and Upgrades
22
Intel
®
Server System R2000LH2/LT2 Service Guide
Removing and Installing the Front End Module
Before removing or installing the PCI riser assembly, please make sure following steps are performed:
1.
Ensure the AC power cord(s) are disconnected from the system.
2.
Remove the rack handles. For instructions, see
Removing the Rack Handles
.
3.
Remove the system cover. For instructions, see
Removing the System Cover
.
Removing the Front End Module
1.
Disconnect any cables attached to the front end module.
2.
Removing the six screws securing the front end module from the chassis (see letter
A
).
3.
Slide the front end module in forward and remove it from the chassis (see letter
B
).
Figure 29. Removing the Front End Module
Installing the Front End Module
1.
Push the front end module into place (see letter
A
).
2.
Secure the front end module with six screws (see letter
B
).
Figure 30. Installing the Front End Module
3.
Connect any required cables, please refer to Cable Routing
.
