Opening the Stand
1. Slide the stand out from under the keyboard as shown below.
2.
Li
ft
the stand up from its support base by holding the end in the middle and gently li
ft
ing.
Note: the stand is secured by magnets, so there will be some ini
ti
al resistance.
3.
Hold the stand at the desired angle, and then raise the inner support so that it can be inserted
into the desired slot to hold the stand in posi
ti
on.
4.
Once the stand is securely in place, your mobile device can be safely placed on the stand.
Note:
Excess force should not be applied to the stand because this could cause damage to
the
keyboard and any device being held up by the stand.
