EN
7
The Pendix eDrive is an efficient, high-power direct drive sys-
tem, working without gears or freewheeling. Its control is al-
ready integrated in its smart design. The Pendix eMachine is
located on the left side of the bicycle directly on the supplied
electronic bottom bracket, which identifies the force exerted
through pedaling. The motor then supports you correspon-
ding to the setting/mode you have selected.
Safety notes
Please note: after extended tours with your bicyc-
le at a high support level, the temperature on the
rear side of the motor can become hot.
Should you want to conduct any work in region
of the motor, either let it cool down first or make
sure you wear suitable protective gloves.
If you want to use a gear hub with the Pendix
eDrive, please make sure that the circuit for the
torque of 65 Nm is activated. If necessary ask the
dealer or the manufacturer of the gear hub about
it. If you want to reduce the maximum torque,
simply use the Pendix.bike PRO App to do so.
LED display
ON/OFF button
The ePower (battery) is the power pack and central control
unit of the Pendix eDrive. It supplies the necessary energy
for the drive system of the bicycle. At the same time, the ON/
OFF button, as well as the LED display for the charging level
are also integrated in this single unit.
Using the rotary switch of the ePower300 and ePower500 it
is possible to choose between three assistance levels. The
ePower150 has only one level of assistance which is the
SMART
mode.
On delivery, the battery is partly charged. In order to obtain
the energy for the entire distance of a journey with your Pe-
delec, you must charge the battery to its maximum level. You
can operate the battery between temperatures of -10° C and
+50° C (14° F – 122° F). You cannot exploit the full capacity of
the battery at low temperatures.
Safety notes
• Do not drop or throw the battery! Avoid any
kind of impact! In such cases, liquid may esca-
pe, causing fire or explosion.
• Do not use force when working with the bat-
tery! If the battery is deformed in any way,
the integrated protective mechanism can be
damaged. Here again, fire or explosion may
result.
• Do not use the battery if it is damaged. The li-
quid inside it may escape, causing damage to
the eyes and even blindness!
Remove the battery from the Pedelec if you wish
to transport it, for example by car.
• Also remove the battery whenever you want to
carry out any kind of work on the Pedelec, for
example maintenance or assembly. Caution:
there is a hazard of injury if you activate the
ON/OFF button inadvertently.
• Never open the battery. This can cause a short
circuit. Note: all and any guarantee claims be-
come invalid if the battery is opened.
• Never store or tranport (carry) the battery to-
gether with metal objects capable of causing a
short circuit: such objects can be, for example,
paper clips, nails, screws, keys or coins. A short
circuit can cause a fire or burns.
• Keep the battery away from heat, for example
1. intense sunshine, which can lead to the
battery being switched off (self protection
over 60 °C) and
2. fire, there is a danger of explosion.
5.1 eMaschine
5.2 ePower
ePower300
LED display
ON/OFF button
ePower150
