Configuring the Smart sheet
for the First Time
Cha
p
te
r
3
.
Us
in
g
Pro
d
u
c
t
11
Configuring the Smart
sheet
for the First Time
If you use the smart sheet for the first time, you must carry out initialization such
as screen settings and Bluetooth connection. Please check the following to see
how to configure the initial settings.
The provided smart pen and Bluetooth dongle always work in a pair.
If you install the product on another PC or move it to another place, make sure that you carry
both of them.
The smart pen does not work with the Bluetooth dongle sold on the market or the Bluetooth
dongle built in the laptop.
Make sure that you use the provided Bluetooth dongle.
Configure the initial settings of the smart sheet as shown below.
Turn on the PC and
beam projector.
Connect the
Bluetooth
dongle.
Run
PenlabMgr.
Turn on the
smart pen and
configure the
settings.
Step 1
Step 2
Step 3
Step 4
Step 1
Turn on the PC and beam projector.
Turn on the computer and beam projector.
Step 2
Connect the Bluetooth dongle.
Connect the Bluetooth dongle to a USB port.
Step 3
Run PenlabMgr
Click the PenlabMgr icon on Desktop to run the program.
If it runs successfully, a pen-shaped icon appears in red at
the bottom right of the screen (system tray).
If you do not connect the Bluetooth
dongle, PenlabMgr does not run.
(A message appears to tell you to
connect the Bluetooth dongle and run
the program again.)
