Pelton & Crane Spirit 3000 Series, Руководство по установке

Страница: 31 / 36

16
047655 r10
Guidance and manufacturer's declaration-electromagnetic emissions
The Model SP3000 intended for use in the electromagnetic environment specified below. The
customer or the user of the SP3000 should assure that it is used in such an environment.
emissions Test Compliance electromagnetic environment Guidance
RF emissions
CISPR-11
RF emissions
CISPR-11
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations/ Flicker
Emissions
IEC 61000-3-3
Group 1
Class A
Class A
Complies
The SP3000 chairs use RF energy only
for its internal function. Therefore, their
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
The SP3000 chairs are suitable for use
in all establishments, other than
domestic establishments and those
directly connected to the public low
voltage power supply network that
supplies buildings used for domestic
purposes.
Recommended separation distances between portable
The Model SP3000 intended for use in the electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the SP3000 can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the SP3000 as recommended below, according to the maximum output of
the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d= 1.2√P
80 MHz to 800 MHz
d= 1.2√P
800 MHz to 2.5 GHz
d= 2.3√P
0.12
0.38
1.2
3.8
12
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz to 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.