Pelton & Crane Spirit 3000 Series Скачать руководство пользователя страница 29

Страница: 29 / 36

047655 r10

Cleaning dental Chair upholstery

CleanInG, dIsInfeCTInG, & sTeRIlIzaTIon

NOTE: As with all cleaning products, first clean a small inconspicuous area to ensure the material will not discolor or

fade. It is recommended that each stain be cleaned in a step by step manner using the sequence below:

1. Regular Cleaning

A Solution of %10 household liquid dish soap with warm water applied with a soft damp cloth. Rinse with clean

water and wipe dry. Cleaning frequency depends upon use. It is recommended that upholstery be cleaned between
patients.

2. Stubborn Stains
Use detergent cleaners such as Formula 409 or Fantastik. Wipe using a soft cloth or bristle brush. Rinse with clean

water and wipe dry.

3. More Difficult Stains
Carefully clean the stained area with lighter fluid (naphtha) or rubbing alcohol. Apply with a soft white cloth and rub

gently. Rinse with clean water and wipe dry.

4. Ultra Leather Upholstery
Clean spots with mild soap and water or an ordinary household cleaner such as Fantastik or 409 cleaners. Wipe off

any soap residue with a clean damp cloth.

Air dry or dry quickly with the warm setting on a hair dryer.

For stubborn stains use a mild solvent.

Disinfect ultra leather upholstery with a 5:1 bleach solution.

Dry cleanable by conventional methods using commercial dry cleaning solvent.

Other Tips

Always apply cleaners with a soft white cloth. Avoid the use of paper towels.

When using strong cleaning solutions such as alcohol, it is advisable to first test in an inconspicuous area.

Never use harsh solvents or cleaners that are intended for industrial use.

To restore luster, a light coat of spray furniture wax may be used. Apply to chair; allow to set for 30 seconds. Lightly

buff dry with a cleanm dry cloth.

Содержание Spirit 3000 Series





































Результаты поиска

Содержание Spirit 3000 Series

Отзывы:

Бренды по названию

Популярные бренды

Pelton & Crane Spirit 3000 Series, Руководство по установке

Результаты поиска

Содержание Spirit 3000 Series

Отзывы:

Бренды по названию

Популярные бренды