manualshive.com logo in svg

Pelsue TFAT-11A, Руководство по эксплуатации продукта

Поделиться
Скачать
Pelsue TFAT-11A Скачать руководство пользователя страница 13

#500615-001 - 

Product Manual: Model #TFAT-11A TELESCOPIC FALL ARREST TOWER

 - Revision 01 - Date: 04-29-2010

Page 13

The load rating 

given may super-

sedes any load 

rating reported 

with an accessory 

component.  The 

capabilities of all 

components of 

a PFAS must be 

considers prior to 

usage.

5.0 - Product Operation

The Pelsue #TFAT-11A Telescopic Fall Arrest Tower is constructed of structural aluminium and incor-
porates several steel components.  The #TFAT-11A fall arrest tower can be extended and secured 
in several positions providing an elevated anchorage for a single personal fall arrest system.  The 
#TFAT-11A’s maximum attainable anchorage height is approximately 11’ from the working surface 
when. All specifi cations, instructions, and procedures provided within this manual or upon Pelsue 
Specifi cation Documents  are based upon and only valid for usage with Pelsue-manufactured and 
approved mounting bases.  The T.A. Pelsue Company can not verify equipment safety and/or com-
pliance when utilized with anything other than Pelsue approved bases and accessories.

5.1 - Product Description & Capabilities

The following section will address the capabilities and the general operation of the Pelsue #TFAT-11A Telescopic Fall 
Arrest Tower.  The instructions contained within this section should be adhered to each and every time the product is 
used.  Any person tasked with installing or operating this piece of equipment should be familiar with these procedures.

! WARNING !

 - 

The user must ensure that the structure to which the tower 

base is installed is capable  of withstanding the weight of the system combined 
with the system proof loads in order to retain the stated compliance of the 
entire system.

 

! WARNING !

 - 

The user must ensure that the tower system is properly 

installed & completely vertical in order to retain the stated compliance and 
stability of the entire system.

! WARNING !

 - 

The user must ensure that the two 

sectional locking pins located on the tower structure are 
set in one of the allowable positions and that the pin 
securing the tower system to its base plate is locked 
in place in order to retain the stated compliance of the 
entire system.

Figure #5.1a:

 Loading 

Diagram TFAT-11A

1800 LB.

[816.5 kg]

Proof Load

Telescopic Fall Arrest Tower

 

- 

#TFAT-11A                  

    

General Specifi cations
   

• Safe Working Radius @ Tower Base-  

5’ (60”)

     • Structure Weight 

 

 

- 

75 lbs.

    • Tower Heights 

 

 

-  

Maximum Height    - 11’ - 0”

   

 

 

 

   

 

Minimum Height     -  6’ - 6”

Load Capacity

     • Single user with a maximum weight of 

350 lb. 

 

 

with a safe working radius of 

5’ 

@ Tower Base

     • Refer to loading diagrams for proof loads.

Materials & Construction

 • 

Welded 

Aluminum

Features:
 

•  Easily installs adjacent to elevated work stations requiring access.

 • 

 

Provides an elevated fall arrest anchor point

 • 

 

Constructed primarily of lightweight & 

        corrosion-resistant powder coated 
        aluminum

! WARNING !

 - 

Any lifeline connection made to the #TFAT-11A system must 

be made in conjunction with a 900 LB. MAF fall arrest device.  Failure to do so 
can result in serious injury or even death.

Содержание TFAT-11A

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды