Pelsue PH Series, Руководство по эксплуатации продукта

Страница: 7 / 36

501144-001 - Product Manual - PH Series Personnel Hoists - Revison 03 Revision Date - 2018-06-13
Page 7
2.0 - Introduction & Product Information
This product is a part of a man rated confined space
entry/retrieval system. The user must read, understand
and follow the instructions contained in this manual
for each component or total system before using
this equipment. Establish an appropriate training,
maintenance and inspection program for your people
and the equipment. Failure to follow these instructions
could result in serious injury or death.
Congratulations on your choice of a Pelsue PH Series Personnel Hoist to compliment your entry/retrieval operation.
This equipment has been designed and manufactured to exceed confined space requirements and regulations to meet
the needs of the discriminating operator for the efficient and safe entry or retrieval of personnel from a confined space.
The PH Series Hoist are designed and tested as Mechanical Retrieval/Lifting Devices as defined in OSHA 1910.146 &
ANSI z117.1. PH Series Hoists are approved for use with personnel and are intended to facilitate hoisting and/or rescue
& retrieval operations when required.
Safe, efficient and trouble-free operation and maintenance for your component or system requires that you or anyone
else who will be operating, maintaining, or inspecting the equipment, read, understand and follow all the safety, installa-
tion, operation, maintenance and inspection instructions contained in this manual. This manual covers the entire line of
the PH Series Personnel Hoist manufactured by Pelsue. Use the Table of Contents or Index as a guide to find specific
information.
keep this manual handy for frequent reference and to pass to new operators. Establish a regular training program for
experienced and new operators per these instructions. Establish a regular maintenance and inspection program to keep
the equipment in top condition.
2.1 - Serial Number
Always give your dealer the serial number of your Pelsue PH Series Personnel Hoist when ordering parts or requesting
service or other information.
The serial number decal is permanently embossed with a serial number. The serial number decal will appear as shown
below in Figure 2a and is located on the Pawl Cover at the drive handle side of the hoist (see Figure 2b ). The serial
number is also permanently stamped into the base of the hoist. A space has been provided below for the recording of
the serial number for future reference. !Do Not Remove the serial number decal or attempt to remove the stamped serial
number!
Hoist Model:______________________________________
Serial Number :___________________________________
Date of Manufacture (DOM):______________________
Figure 2a:
Serial Number Decal
Figure 2b:
Serial Number Decal Location
SERIAL
NUMBER
LOCATION