Peloton TR-01, Руководство пользователя

Страница: 5 / 28

5
N O T I C E S
1 Reorient or relocate the receiving
antenna.
2 Increase the separation between
the equipment and receiver.
3 Connect the equipment to an
outlet on a circuit different from
that to which the receiver is
connected.
4 Consult the dealer or an
experienced radio/TV technician
for help.
CAUTION:
1 To comply with FCC RF exposure
compliance requirements, a
separation distance of at least 20
cm must be maintained between
the antenna of this device and all
persons.
2 This transmitter must not be
co-located or operating in
conjunction with any other
antenna or transmitter.
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device must not cause harmful
interference, and (2) this device must
not accept any interference received,
including interference that may cause
undesired operation.
NOTE: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
This product is ANT+™
certified and is compatible
with ANT+ sensors
that support heart rate
monitoring.
Do not attempt to service the Tread
yourself other than performing the
basic maintenance described in this
manual. Service other than basic
maintenance should be performed
by authorized personnel.
Keep hands away from moving parts.
Never touch the moving belt or reach
under the Tread while it is powered
on. The slat belt extends below the
surface of the deck. Never put items
under the deck.
Never operate the Tread if it isn’t
working properly, or if the power cord
has been damaged. Keep power cord
away from heated surfaces, sharp
edges, and water.
Do not soak or spray Tread surfaces
with liquid. Clean using a damp cloth.
Do not store items in the side
compartments while the Tread is
in use.
Metrics on the screen, including heart
rate monitoring, may be inaccurate.
Use values for reference only.