Peloton TR-01, Руководство пользователя

Страница: 24 / 28

24
PROBLEM:
The Speed and/or Incline knob does not work.
SOLUTION:
If the Tread is awake and the controls are not
working, first, ensure that the Tread is not
in Free Mode. Controls will not work in Free
Mode. Then, check the control lights. The
Tread will function only when the safety key
is present and fully engaged. Solid red lights
indicate that the safety key is not connected.
Try detaching and reattaching it. Blinking
red lights indicate an error. Follow the
instructions on the screen, or, if there are no
instructions, use the switch on the underside
of the deck to turn the Tread off and then on.
PROBLEM:
The Free Mode button does not work.
SOLUTION:
Make sure both speed and incline are set
to zero. If the Tread is awake and both
speed and incline are set to zero, use the
switch on the underside of the deck to turn
the Tread off and then on.
T R O U B L E S H O O T I N G
CONTINUED
PROBLEM:
An object falls into the Tread.
SOLUTION:
Look underneath the Tread. If the object has
fallen through to the floor, raise the incline
to at least 2%, turn off and unplug the Tread,
and retrieve it. If it is not there, it may be
stuck inside the belt. Turn on Free Mode and
slowly move the belt forward until the object
falls to the floor.
PROBLEM:
The slat belt comes to a stop during a
workout.
SOLUTION:
If an error occurs during operation, the Tread
belt will come to a stop. The stop may be
gradual or more sudden, depending on the
error and your speed. Errors could include:
•
The safety key disconnecting
•
The Tread not registering the presence of
a user below the minimum user weight
•
A temporary issue with the touchscreen
software
If an error occurs, follow the instructions on
the screen. If there are no instructions, use
the switch on the underside of the deck to
switch the Tread off. Wait 30 seconds before
switching it back on. See support.onepeloton.
com for more information on possible errors.
PROBLEM:
Control lights are red.
SOLUTION:
•
Solid red lights indicate that the
safety key is not connected. The
Tread will function only when the safety
key is present and fully engaged. Try
detaching and reattaching it.
•
Blinking red lights indicate an error.
Follow the instructions on the screen,
or, if there are no instructions, use the
switch on the underside of the deck to
turn the Tread off and then on.
See support.onepeloton.com for more
information on possible errors.
CAUTION: Any repair or troubleshooting procedure other than those described in this section must be performed
by authorized personnel.