3
OPERATING INSTRUCTIONS
Step.1.
● Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 120V 60Hz AC power supply, before use, please confirm if the rated current of the
power socket meets the local requirements with safe grounding device, otherwise, please replace it with
the qualified socket.
Step.2.
● Put the machine on the flat place
Uneven place may possibly cause the tip-over switch at abnormal position, then the fan heater can’t work
after turning on, therefore, please put the fan heater on the flat place, at least the surface below the base
of the fan heater must be flat.
Step.3.
● Plug in the fan heater
Plug the fan heater directly into a wall outlet / receptacle, fit only one way in a polarized outlet, match wide
blade of plug to wide slot and fully insert, then the POWER indicator “ ” lights on( no matter whether
the fan heater is turned on or not, the POWER indicator is on once the fan heater is plugged in). If the plug
does not fit fully in the outlet, reverse the plug and try again. Never use the fan heater with an extension
cord or reloadable power tap (outlet / power strip).
Step.4.
● Turn on the fan heater and select functions
1. Turn on the fan heater
Press the “ ” key to turn on the fan heater.
2. Mode setting
Press “ ” key continuously to select 4 functions: (Heat) 1500W High, (Heat) 900W Low, (Fan ) High,
(Fan) Low.
3. Temperature setting (only for heating function)
Select “ ” or “ ” mode, then press “ ” key continuously to set the Temperature:
65°F
、
70°F
、
75°F
、
80°F
、
85°F, e.g. If the temperature is set at 85°F, the fan heater will turn off
DO NOT COVER
Control panel
Safty grille
ON/OFF
Temperature setting
function display
Temperature
display
Mode setting
°F
（Fan）LOW （Fan）HIGH
（Heat）LOW
（Heat）HIGH
POWER
