IN
S
TRUCTIONS
USER SERVICING INSTRUCTIONS
NOTICE
1. When you replace the fuse, please operate cautiously to avoid accidental damage.
2. If it is hard to place the new fuse, ensure that the fuse is in the correct orientation.
CLEANING
FOR USE
USER
SERVICING
INSTRUCTIONS
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
2. Open fuse cover. Slide open fuse access
cover, that is on top of the plug
,
towards
blades.
3. Remove fuse carefully. Insert the tip of your
tool into fuse slot (close with the terminal),
then pry the fuse gradually and slowly, but not
overexert. If it feels tight, you can try to pry the fuse little by little. When one side of
the fuse has been pried, then you can get the fuse out entirely.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide the fuse access cover back to the closed position.
6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that
should not be removed. Discard product if the attachment plug is damaged.
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.
Thoroughly remove soap film with clean water on a cloth or sponge.
3. Ensure that water or other liquid does not enter inside of the motor.
Page 6
Page 7
INSTRUCTIONS FOR USE
Instructions for operation
Button Operation
Vertical Knob
Push for movement
Pull to lock
Side-to-Side Oscillation
Rotate knob to lock
0: OFF
1: Low Speed
2: Medium Speed
3: High Speed
Base Installation
Tilt Adjustment
Manual
Grill buckle
7. Self-locking installation.
