Page 4
Page 5
INSTALLATION
INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
INSTALLATION INSTRUCTIONS
Name of components
6
2
1
Front Grille
Motor
Rear Grille
Plastic Nut
Tighten Plastic
Nut clockwise
to secure the Rear
Grille.
Fan Blade
After installing
Fan Blade, turn
it with hand to
ensure normal
movement.
Fan Blade Nut
Tighten Fan Blade
Nut by turning it
counterclockwise
while holding the fan
blade still.
Then install Front
Grille.
Buttons
Base
1. Remove the Fan Blade Nut and the
Plastic Nut that come assembled to the
motor shaft.
Rear Grille, Fan Blade, and Front Grille Installation
Place the motor
assembly into the
base as shown above.
Then, rotate the knob
that is sticking below
the base to secure the
motor assembly to the
base.
2. Install the Rear Grille into the motor by
aligning 3 pins.
3. Tighten the Plastic Nut by rotating
clockwise until the Rear Grille is
secure.
4. Place the Fan Blade on the motor
shaft and ensure that the fan blade is
properly pushed against the rod going
through the motor shaft. Rotate the fan
blade to ensure normal movement.
5. Tighten the Fan Blade Nut by
holding the Fan Blade and rotating
counterclockwise until the Fan Blade
is secure.
6. Install the Front grille by placing the
Front Grille over the Rear Grille and
using both hands to squeeze the
Grilles until a clicking noise is heard.
Ensure that the Front Grille is over-top
of the Rear Grille in all locations.
