3
OPERATING INSTRUCTION
How to use
[Inspection before startup]
1. Check the power cord for any damage;
2. Prior to use, please confirm that the power socket has acceptable rated current,
and if not, please replace it.
[Operation instructions]
<on/off >: By power on, the buzzer will give a long sound of “beep”. Press the
on-off key to start up and enter the high-grade heating, and then press the
on-off key to shut down.
<Gear selection >: Gently press the gear selection key “MODE” under the working
state to select any one of high-grade, middle-grade, low-grade and energy-saving
work modes.
<Temperature setting >: Under the working state, press and hold the “
∧
” key or
“
∨
” key to set the temperature, with the temperature setting step of 1; long press
the “
∧
” key or “
∨
” key to set the temperature quickly. After temperature setting,
exit the temperature setting interface in case of no operation for 5 seconds. In the
event of first use or self-inspection for memory information clearing, the machine
will operate after start according to the factory settings, and the high temperature
setting default is 95°F.
<Power-on by alarm>: Press the timing key “
” in standby mode to enter the start
setting interface. Press the “
∧
” key or “
∨
” key to set time for startup. Long press
“
∧
” key or “
∨
” key to quickly set time for startup. Upon the time set, the machine
will start and the buzzer will make a long sound.
<Power-off by alarm>: Press the timing key “
” in startup mode to enter the
shutdown setting interface. Press the “
∧
” key or “
∨
” key to set time for shutdown.
Long press “
∧
” key or “
∨
” key to quickly set time for shutdown. Upon the time set,
the machine will shut down.
A: Timing range between 0 and 24 hours. Increase or decrease for 1 hour by
pressing the “
∧
” key or “
∨
” key each time. When the setting value is 0H, press the
“
∨
” key to change the setting time to 24H. When the setting value is 24H, press
the “
∧
” key to change the setting time to 0H. When the setting value is 0H, cancel
the timing; when the setting value is not 0H, start the timing. After the time is set,
press the “
” key or “MODE” key, or in case of no operation for 5 seconds, exit
the timing MODE.
B: If the time is set, press the “ ” key to shut down and cancel the timing.
C: After timing, press the “
” key to check the remaining time and reset the time
at any time.
During the timing period, the machine can be stopped or restarted under the
temperature control state, and the timing will be kept normally, and not affected by
such stop and restart. In case of closedown or power off during the timing period,
the timer will reset to zero.
<Child lock function>: Under no child lock state during startup and standby, press
and hold the “
” key and the “MODE” key for 3 seconds at the same time to start
the child lock function. Under child lock state during startup and standby, press and
hold the “
” key and the “MODE” key for 3 seconds to turn off the child lock
function.
