CLEANING
1. Be sure to unplug the fan from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter inside of motor.
Notice:
1. When you replace the fuse, please don’t operate suddenly or overexert, or else
the product will be damaged or cause accident.
2. When you feel it hard to operate, please make sure you have got the right way.
a) Grasp the plug and remove it from the receptacle
or other outlet device. Do not unplug it by pulling
on cord.
b) Open the fuse cover. Slide to open the fuse access
cover on top of the attachment plug towards blades.
c) Remove the fuse carefully. Insert the tip of your tool into
fuse slot (close with the terminal).Then pry the fuse gradually and
slowly,but not overexert. If it’s tight, you can try it at several times and pry the
fuse little by little. When one side of the fuse has been pried, then you can get
the fuse out entirely.
d) Risk of fire. Replace the fuse only with 2.5 Amp, 125 Volt fuse.
e) Close the fuse cover. Slide to close the fuse access cover on top of the
attachment plug.
f) Risk of fire. Do not replace the attachment plug, which contains a safety
device (fuse) that should not be removed. Discard the product if the attachment
plug is damaged.
USER SERVICING INSTRUCTIONS
