Remote Control:
Drive Plate
Rotate it to adjust the speed/time setting (Clockwise for increase, Anticlockwise for
decrease)
ON/OFF Key
Press it once, the fan will turn on at normal mode. Press it again to shut off. (The fan
starts at speed 01. Rotate the Drive Plate clockwise for higher speed. The wind
speed ranges from 01 to 12 with an increment of 1)
OSC Key
After the fan starts, press this key once to start oscillation. Press the key again to
stop it at the desired direction.
Mode Key
After turning on the fan, press it repeatedly to choose the mode in order of
“Sleep-Natural-Silent”. Press it the fourth time and exit to the normal mode.
PRO/Timer Key
a. Setting a Starting Time:
Plug in the unit. Press this key once without turning on
the fan. Rotate the Drive Plate to select time from “0.5 to 12 hours”with an increment
of 0.5. (The increment increases to 1 after the number reaches 10 hours) The
starting time was set up when the number on screen flashes once. Then a clock
signal will be on display. And the fan will automatically turn on at your setting time.
b. Setting a Stopping Time:
After turning on the fan, press this key into time
setting. Rotate the Drive Plate as above to select time. The stopping time was set up
after the number flashes once. And the clock signal will be on screen. Then the fan
will automatically turn off at the appointed time.
(PS: To exit time setting, press the PRO/Time Key again. To cancel the time setting,
press the time key once, rotate the hour to 00. Wait for 5-10 seconds, the former time
setting was canceled when the clock signal disappears on screen.)
The fan will auto shut off after 12 hours without operation.
