pellenc SELION M12, Перевод оригинального руководства

Страница: 10 / 51

CHAINSAW SELION M12
51_149238-C
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by
taking proper precautions as given below:
1. Maintain a firm grip, with thumbs and fingers en-
circling the chain saw handles, with both hands
on the saw and position your body and arm to al-
low you to resist kickback forces. Kickback forces
can be controlled by the operator, if proper precau-
tions are taken. Do not let go of the chain saw.
2. Do not overreach and do not cut above shoul-
der height. This helps prevent unintended tip con-
tact and enables better control of the chain saw in
unexpected situations.
3. Only use replacement bars and chains specified
by the manufacturer. Incorrect replacement bars
and chains may cause chain breakage and/or kick-
back.
4. Follow the manufacturer’s sharpening and main-
tenance instructions for the saw chain. Decreas-
ing the depth gauge height can lead to increased
kickback.
51N_19_008
2.5. SAFETY MEASURES RELATED TO THE USE OF THE PELLENC BATTERY AND CHARGER
Refer to the instructions supplied with the PELLENC battery and charger.
2.6. PERSONAL PROTECTION EQUIPMENT
Equipment Wearing of
1 Safety helmet Mandatory
2 Protective visor Recommended
3 Resistant work gloves Mandatory
4 Safety footwear Mandatory
5 Ear protection Mandatory
6 Protective goggles Required
7 Safety jacket or over-sleeves Mandatory
8 Work trousers Mandatory
10