pellenc RASION 2 EASY, Руководство по эксплуатации

Страница: 20 / 48

LAWN MOWER RASION 2 EASY
59_141654-B
Always clean the optical sensor with a cloth soaked in water. Never use a water jet or a solvent!
5.2.3. ADJUST THE CUTTING HEIGHT
The cutting height can be adjusted using the cutting height adjustment handle (16) which allows you to select from
six different cutting heights, from 75 mm at the highest, to 25 mm at the lowest.
Hold the cutting height adjustment handle (16) firmly
while simultaneously pressing on the two buttons to re-
lease it from its position.
Hold the buttons down and move the handle to one of
the six available positions, ranging from 75 mm for the
highest mowing height to 25 mm for the lowest.
75
65
55
45
35
2
5
75
65
55
45
35
25
75 mm
59N_18_050
Caution
Never work with the mower when the cutting height adjustment handle (16) is in the "parking /
transport brake" position.
In this position the cutter deck housing comes into contact with the rear wheels and acts as a
brake. The mower can therefore neither move forwards nor reverse and cannot be pushed.
Note
If in doubt about which cutting height to select, always start mowing with the highest cutting height. Examine
the result on a small area and, if necessary, adjust the cutting height again, being careful not to cut more than
1/3 of the height of the grass.
5.3. CONTROLS
5.3.1. DRIVING FORWARD
Press the forward speed trigger (5) and hold it to drive
the mower forward.
59N_18_021
20