WARNING: steam tension
All power supply lines may be exchanged only by a certified electrical expert taking
under the IEC 60364.
The installation of the mirror may only occur to an electrical expert with knowledge of
DIN VDE 0100-part 701 and national laws and rules.
Changeability / Repair
The source of light is interchangeable by electronic experts only.
Unplug power line
before changing or repair the electronic parts!
Structural changes and adjustments lead to the extinction of the guarantee and legal
liability.
IMPORTANT note:
By installation on the wall please respect the use of suitable fixing materials (dowels
for right wall material) and in wall obstructed electric lines.
Before cleaning the mirror, all stream power supplies should be interrupted.
We recommend to mount the mirror with two persons to avoid any damages.
Please do not place the mirror on hard sub-surface, because the edges and corners
can burst by light connection to hard undergrounds.
Disposal methods
LED-Mirror
LED-Mirror, that are marked with the adjacent symbol must not be disposed
of with the trash.
You are required to dispose of such mirrors or electronic devices and
electronic waste separately
– please dispose your LED-Mirror at your local
disposal company.
Packaging
The packaging of the mirror is made of cardboard and appropriately labeled
plastics that can be recycled.
Please reuse these materials for recycling.
Further information on disposal can be obtained from your local authority.
WEEE-Reg.No. DE 67404515,
information in accordance with Section 18 (2) of the
Electrical and Electronic Equipment law