6
7
ADJUST AND TIGHTEN PLATE CLAMPS
ASSEMBLE LANYARDS TO LOWER SADDLE ARMS
1. WITH PIN INSERTED AND FASTENERS LOOSENED,
ADJUST PLATE CLAMP POSITION TO CENTER
AND ALLOW EASY PIN REMOVAL/INSERTION.
2. TIGHTEN SCREWS WITH M4 ALLEN TOOL.
1. SQUEEZE END OF LANYARD AND PUSH
THROUGH HOLE IN PINNED YOKE.
2. FEED OTHER END BACK THROUGH LOOP.
PUSH PAST CRIMP EDGE TO SECURE, AS
SHOWN.
3. ATTACH LOOSE END TO KEY-RING OF QUICK
RELEASE PIN. REPEAT FOR OTHER LANYARD.
7.3
7.1
5
5.2
5.3
LOADING CARGO CASE ON SADDLE MOUNTS
CLEARING REAR HOOKS
CHECK BOTH REAR HOOKS ARE NOW ENGAGED
5.1
TILT CASE 20 DEGREES AND LOWER
REAR EDGE TO REST ON SADDLE ARMS.
BY CLEARING THE ARMS AT
THE FRONT, THE REAR HOOKS
WILL ALSO CLEAR THE PLATES.
SLIDE CASE BACK AGAINST
UPRIGHTS TO ENGAGE HOOKS.
TILT CASE DOWN TO REST IN
HORIZONTAL POSITION.
7.2
7
8