Pelican PAC3/PAC6 Premium Whole House Water Filter &
Advantage Series Salt Free Softener Combo
©
2019
Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 1
3
www.pelicanwater.com
(877) 842-1635
IN
OUT
Outgoing
Water
To House
Incoming
Water
Supply
Wall
Wall
Whole House Water Filter
Sediment
Filter
INLET
OUTLET
Brine Tank
Salt Softener
Drain Line Barb
1. Set the Bypass Valve into bypass mode.
2. Slowly turn on the main water supply until all pipes are pressurized.
3. Slowly open the bypass valves.
4. Let the Softener Tank fill completely and then open the bypass valves the rest of the way.
5. Check for leaks.
6. Plug in the Electronic Head.
Note:
Power Source - For safety reasons the outlet must be protected by a Ground Fault Circuit
Interrupter (GFCI).
9. Attach the black Brine Tank hose to the connection on the top of the Electronic Head by removing the
black compression nut. Slide the compression nut over the end of the black tube, fully inserting the Brine
Line into the port and tighten the compression nut.
10.Add approximately 160 lbs. of salt pellets to the brine tank. (Example: four 40-pound bags)
11.Add 5 gallons of water to the brine tank.
Complete the Installation
9.
IMPORTANT!
•
Ensure the PVC Tubing Backwash Drain
Line is not submerged and is free of kinks.
•
Maximum vertical rise of the backwash line
is 6 feet.
•
If incorporating two or more backwashing
systems make sure to keep the drain lines
separate.
Rev B
