8
SAFETY PRECAUTIONS
409776
Please, do not use the washing machine
without reading and understanding these
instructions or use first.
Be sure to remove transport brackets
prior first use of the appliance.
Attempted
operation of the blocked machine may
result in irreparable damage which is not
covered by the manufacturer’s warranty!
When connecting your washing machine
to water supply,
be sure to use the supplied
water inlet hose and sealing gaskets.
Failure to observe the instructions for
use
or inappropriate use of the washing
machine may result in damage to the
laundry or machine, or injury to the user.
Keep the instructions for use handy, near
the washing machine.
Do not install the machine in a room where
temperature can drop below 0°C.
Parts of
the machine may be damaged if the water
inside them freezes.
Install the washing machine in a perfectly
horizontal position, on solid flat (concrete)
floor.
Follow the instructions for correct
installation and water and mains
connections (see chapter "Installation and
connections").
Never immerse the end of the drain hose
into the draining water.
Prior starting the washing cycle lock the
door
by pressing them at the designed
spot.
Door may not be open during the washing
cycle.
We recommend running the self-cleaning
program before the first wash
in order to
remove any impurities from the washing
machine drum. (See chapter on” Selecting
additional functions”.
Use only detergents and softeners for
machine wash.
Manufacturer may not
assume responsibility for any damage and
eventual discolouring of gaskets and plastic
components as a consequence of incorrect
use of bleach and/or colouring agents.
For removal of lime residues
use such
agents with added anti-corrosion agents.
Follow the manufacturer’s instructions.
Finish the lime removal by multiple rinsing
to remove completely eventual acid
residues (e.g. vinegar etc.).
Never use detergents containing solvents,
since there is a danger of creating toxic
gasses which may damage the machine and
result in ignition or explosion.
This product does not release silver ions
during the washing cycle.
Upon completion of the washing cycle,
close the water faucet and unplug the
mains cord.
Before transporting the machine
after it
has been used, block the drum by inserting
at least one transport blocking rod.
Disconnect the appliance from the mains
power before inserting the rod!
