EN 7
Connection and repair
• Check the appliance for transport damage. Do not connect a
damaged appliance.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• If you want to make a fixed connection, make sure that a
multipolar switch with a contact separation of at least 3 mm is
fitted in the supply line.
• The equipment should not be connected to the network via
a multiplug socket or extension lead, as the safe use of the
equipment can then not be guaranteed.
•
WARNING: never open the casing of the appliance. The casing
may only be opened by a service technician.
• Disconnect the appliance from the mains supply before starting
any repair work.
• Faulty parts may only be replaced by original parts. The
manufacturer can only guarantee that original parts meet safety
requirements.
• To avoid dangerous situations resulting from any damage to
the connecting cable, this should only be replaced by the
manufacturer, the manufacturer’s service organisation or
suitably qualified persons.
Safe use
•
WARNING: this appliance and its accessible parts become hot
during use. Do not touch the hot components. Keep children
younger than 8 away from the appliance unless they are
constantly supervised.
• This equipment may be used by children older than 8, as well
as by people with physical, sensory or learning difficulties or
with a lack of experience and knowledge, if they are supervised
and instructed in the safe use of the appliance and understand
the associated dangers. Children may not play with the
appliance. Children may not clean or maintain the appliance
unless supervised.
•
WARNING: it is dangerous for unqualified persons to carry out
repairs which require the opening of the appliance's casing. The
casing protects against the release of microenergy.
SAfEtY
