Pelgrim MAG824MAT, Инструкция по эксплуатации

Страница: 120 / 128

24
MAINTENANCE & CLEANING
803456
Aluminium surfaces
Aluminium surfaces should be cleaned with non-abrasive liquid detergents intended for
such materials.
Apply the detergent on a wet cloth, clean the surface and rinse with water.
Do not apply the cleaner directly on the surface.
Do not use abrasive cleaners or abrasive sponges.
Note: The surface should not come into contact with oven cleaning sprays; this may cause
visible and permanent damage.
Stainless steel front panels
(depending on the model)
Clean the surface with a mild cleaner (soapsuds) and a soft non-abrasive sponge.
To avoid damages to the surface, do not use abrasive or solvent-based cleaners.
Lacquer-coated and plastic surfaces
(depending on the model)
Never use abrasive cleaners and sponges, alcohol-based cleaners or pure alcohol to clean
the knobs, door handles, labels and the rating plate.
Remove the stains immediately using a soft cloth and liquid detergents. You may
also use the cleaners made especially for this type of surfaces; in this case, follow the
manufacturer’s instructions.
The aluminium surfaces should never come into contact with oven cleaning sprays, as
these will cause visible and permanent damage.
Appliance door
The door is attached to the appliance and may not be removed. Also, the door may not be
disassembled or otherwise tapered with.
Before you start cleaning the appliance, disconnect it from the
power mains and let it cool down.
Cleaning and maintenance of the appliance should not be
performed by children without appropriate supervision!
803456_en_naslovnica_drug_papir.indd 24 803456_en_naslovnica_drug_papir.indd 24 21. 01. 2021 12:16:54 21. 01. 2021 12:16:54