Pelgrim IK0064, Руководство пользователя

Страница: 31 / 92

EN 9
USE
Be careful with enamelled sheet-steel pans! The enamel may chip (the enamel comes
loose from the steel), if you switch the hob on at a high setting when the pan is (too) dry;
the base of the pan may warp - due, for example, to overheating or to the use of too
high a power level.
• Never use pans with a misshapen base. A hollow or rounded base can interfere with the
operation of the overheating protection, so that the appliance becomes too hot.
This may lead to the glass top cracking and the pan base melting. Damage arising from the
use of unsuitable pans or from boiling dry is excluded from the guarantee.
Minimum pan diameter
• The diameter of the bottom of the pan must be at least:
▷
11 cm for zone ø 16 - 21 cm
• You will achieve the best results by using a pan with the same diameter as the zone.
If a pan is too small the cooking zone will not work.
Pressure cookers
• Induction cooking is very suitable for cooking in pressure cookers. The cooking zone reacts
very quickly, and so the pressure cooker is quickly up to pressure. As soon as you switch
a cooking zone off, the cooking process stops immediately.
Power level setting
The cooking zones have 9 power levels. Beside it there is a boost power level. If you have
switched on the hob the required cooking zone can be chosen within the next 10 seconds.
Set the power level by touching the plus (+) or minus (-) keys (see: Operating the induction hob).
Power distribution cooking zones
• The cooking zones on the right influence each other. Also the cooking zones on the left
influence each other.
The power is automatically distributed when these cooking zones are used at the same
time. This does not have any consequences up to setting 9. Selecting the Boost setting
for one of the cooking zones, however, automatically switches the other cooking zone to a
lower setting.
• If one of the cooking zones is set to boost and you want to set the other zone to setting
9 or Boost, the cooking zone that is set to boost will automatically be switched to a lower
setting.
• The right and left cooking zones do not influence each other. You can set both cooking
zones to Boost.