Pelgrim IDK893ONY, Руководство пользователя

Страница: 32 / 92

EN 10
Power level setting
The cooking zones have 9 levels. Beside it there is a level ‘boost’ (P). If you have switched on the
hob the required cooking zone can be chosen within the next 5 seconds. Set the power level by
touching the slider. At the first touch, the level is set according to the part of the slider that you
touch. By sliding along the slider, the power level setting is changed. By sliding to the right, the
level increasing, while sliding to the left decreases the level. When you move your finger away
from the slider, the cooking field starts to operate at the level set.
Boost function
• You can use the ‘boost’ function to cook at the highest power level during a short period of
time (max.10 minutes). After the maximum boost time the power will be reduced to setting 9.
• Boost function is not available in Bridge mode!
Power management
The Power Management system distributes power between the available cooking zones
arranged in pairs (mid zones as a pair and the right zones as a pair), providing maximum power
at a cooking zone and automatically reducing the power available to the other one.
The display of the second cooking zone alternates, for a few seconds, the power of cooking
chosen and the limited power.
In certain circumstances, the boost setting function may turn off automatically to
protect the electronic components inside the hob.
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also chapter ‘Pans’).
Automatic heat up
This function preheats the cooking zone on maximum power in order to bring it rapidly up to the
required temperature. After a given time interval, the power level returns spontaneously to the
established setting. It may be switched on in any of the zones for all power settings except
for setting “9” where power is set at maximum all the time.
USE