Pelgrim GVWC310L, Руководство пользователя

Страница: 30 / 39

Action Possible causes Problem
Dose according to water hard-
ness. Far too much or far too
little detergent results in poorer
dishwashing results. Incorrect detergent dosage.
Avoid large packages. Old detergent. Detergent is a
perishable product.
Do not cover porcelain with
large bowls or the like. Avoid
placing very tall glasses in the
corners of the baskets. See the
chapter
Loading the dishwash-
er .
Dishes loaded incorrectly.
Place dishes to sit steady. Glasses and cups have toppled
over during the program.
Clean the coarse and fine filters. The filters are clogged.
Check that the filters are fitted
correctly. See the chapter
Care
and cleaning .
The filters are not fitted cor-
rectly.
Check that the yellow drainage
pump stop on the right in the
bottom drain is in place. See the
chapter
Care and cleaning .
Drainage pump stop missing.
Rinse off these types of food-
stuffs if not starting the dish-
washer immediately. Consider
using 1h 65° with the Speed
wash option. Some foodstuffs, such as mus-
tard, mayonnaise, lemon, vineg-
ar, salt and dressings, can
cause spots on stainless steel
if left for too long. Spots on stainless steel or sil-
ver.
In order to avoid marks and tar-
nishing, separate dishes made
from different metals, such as
silver, stainless steel and alu-
minium. All stainless steel can cause
spots on silver if they come into
contact during dishwashing.
Aluminium can also cause spots
on dishes.
See the chapter Settings . Incorrect rinse aid dosage set-
ting. Spots or films on the dishes.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter
Settings .
The setting TAB is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
Top up with salt. See the
chapter
Before washing for the
first time .
Salt compartment empty.
See Water hardness in the
chapter
Settings .
Incorrect water softener setting.
30