Pelgrim GVWC310L, Руководство пользователя

Страница: 21 / 39

Settings
Open the door and press .
To open the dishwasher's settings menu, press and hold and until SEt is shown on the display.
Use to step through the menu.
Confirm / Next setting Select alternative
Open the dishwasher's settings menu
To exit the menu, step through it or press .
Alternatives Settings
A beep confirms that the control panel has been pressed. 2:00 - 2:03 Sounds 2
A beep indicates when a dishwashing program has
ended.
Error messages are always indicated by a loud buzzer.
Setting for rinse aid dosage. The rinse aid dispenser can
be adjusted between 00 (Off) and 05 (High dosage). 3:00 - 3:05 Rinse aid 3
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
Pre-selected at factory: 04
Adjusting the water softener. Select a setting depending
on the hardness of the water supply. It is important that
this setting is correct! 4:00 - 4:09 Water hardness 4
See Water hardness in the chapter Before washing for
the first time .
For a water supply with a hardness below 6°dH (10°fH /
7°eH / 1.0 mmol/l), select 00. The water softener is deac-
tivated and no salt needs to be added.
Pre-selected at factory: 04
Activate this setting when using an all-in-one detergent
that contains rinse aid. 5:00 (Off)
5:01 (On) TAB 5
21