37
Mounting
Installing door panel
(see fig. 14)
fig. 14
■
Place the template on the inside of the door
panel. The top of the template is the top of
the door panel.
■
Transfer the markings of the drill holes on
the template onto the door.
■
If the door panel is made of solid wood,
predrill the holes with a 2 mm drill (12 mm
deep).
Note:
Allow for possible differences in the thickness
of the panel (milled hollows or bevelled
edges).
■
Fix the mounting material to the door, as
indicated on the template.
fig. 15b
■
Attach the panel to the door of the
dishwasher by pressing the upper pins
(fig. 15a) into the slots of the plastic section.
Slide the panel up a little. Screw the panel
tight from the inside, as shown in figure 15b.
MOUNTING
fig. 15a
