Peleman Hard Cover Maker 650, Руководство пользователя

Страница: 8 / 32

8
Installation instructions
Place the Hard Cover Maker 650 on top of a solid flat horizontal surface that
can hold at least 100 kg. When you lift the Hard Cover Maker 650, use only
the side handles (6) and make sure you are with at least 2 persons for lifting.
Plug in the power cord in the corresponding socket.
Connect the power cord to the power supply. Make sure the cable is laid in a
way that it cannot obstruct the passage or that a person would trip.
Place the Hard Cover Maker 650 on top of the Table for the Hard Cover
Maker. Make sure the 4 feet of the Hard Cover Maker 650 fit in the holes
located on the top of the Table.
Place the Spine Maker Press on top of the
Hard Cover Maker 650.
Make sure the 6 feet of the Spine Maker
Press fit in the holes located on top of the
Hard Cover Maker 650.
How to place the Harc Cover Maker on top of the Hard Cover Maker Table.
How to install the Spine Maker Press (optional)
6