pela tools 502331, Руководство пользователя

Страница: 22 / 36

7.1 There are two 8 mm hoses (colors orange
and blue) from electromagnetic
valve 2 (# 3) on the control panel, connect them
with the two adapters to the # 9 Cylinder Block
for tank, as shown in picture H2-C2; H3-C3.
7.2 There is an orange hose (16mm) from the
solenoid valve 1 (# 2) on the control panel,
connect with # 21 G1 / 2 ”-16 to the tank, as
shown in figure H4-C4.
Note! The hose must be inserted properly
during assembly. To release the hose, push the
plastic ring inwards. Focus and
incorrect mounting can lead to the blaster not
working properly.
8. Mount the right bar and back plate with the
legs, use M6x12MM bolt and M6 nut. Place
PSA foam on edge to edge with thought frame,
see picture.
9. First place the grid on the table. Then lift
up the blast cabinet and place it on top of the
table with grilles. Make sure that the cabinet is
placed in accordance with the holes on the
table, to be able to mount with M6C16mm
bolts and 6 washers.