background image

Contact

PELA Tools

 

Solängsvägen 13

 

SE-513 70  Borås

Phone: 033-202650 

E-mail: [email protected]

Environmental protection / 

Scrapping

Recycle any unwanted material, 

 

do not throw it in the household 

 

rubbish. All machines, accessories 

and packaging must be sorted and 

left at a recycling center and disposed 

 

of in an environmentally friendly manner.

Specifications

Connection................................ 230V, 50 Hz, 1200W

Max. working pressure............................ 60~110PSI

Compressed air consumption ............................1/2”

External dimensions.............. 70”W x 79.5H x 57.8D

Work lighting.............................. 3 LED lampor, 20 W 

Complete with lamp, gloves and protective film.

Safety instructions

Carefully read the manuals safety instructions 

 

before using the blasting cabinet. WARNING! When 

using the blast cabinet, basic precautions must 

always be followed to reduce the risk of personal 

injury and other risks caused by excessive air 

 

pressure.
1.  Connecting compressed air hoses should not 

have a dimension smaller than 8 mm and must 

withstand a pressure of at least 8.6 bar. Always 

disconnect the plug from the wall socket and 

disconnect the compressed air hose when the 

blasting cabinet is not in use. And when filling 

with blast media, when servicing all kinds of 

 

accessories and when changing accessories.

2.  The compressed air must be free of 

 

contaminants such as oil, moisture, etc. Do not 

use the blasting cabinet in damp, wet or poorly 

lit workplaces. Do not expose the blast 

 

cabinet to rain. Keep the work surface well lit 

and clean. Dirty workplaces involve a greater 

risk of accidents.

3.  Only connect to a grounded 230 V / 50 Hz 

electrical outlet.

4.  Wear safety goggles and hearing protection.

5.  Always wear approved safety goggles when 

using the blasting cabinet. NOTE! Ordinary 

glasses are not goggles. Use hearing protection 

as the noise level of the blower cabinet may be 

high during use. Use only recommended blas

-

ting materials. Always replace a broken protec

-

tive glass with one of the same size and quality.

6.  Keep children away from equipment. Children 

are not allowed to stay near the blast cabinet. 

Never let them handle the blast cabinet or its 

accessories.

7.  When the blast cabinet is not in use, it must 

be stored in a dry place to protect against rust, 

and in a locked space so that it is stored out of 

reach of children.

8.  Replace the gloves. Protective gloves wear, 

replace them with new ones when required.

9.  Close and lock the door during use.

10. Be careful of the adapter. Never disconnect the 

adapter from the wall outlet with wet hands. 

Keep the power cord away from heat, oil and 

sharp edges.

Important!

Carefully read the safety instructions and 

 

installation instructions before using the product. 

This way you get the most out of your device and 

accidents can be avoided. Save the operating 

 

instructions for future use. In the event of a sale, 

the instructions must accompany the cabinet.

Содержание 502331





































Отзывы: