User’s manual
10
EN
SaFEty iNStRuctiONS
Please read this operation instruction carefully before use, and keep it for future
reference. Producer does not take responsibility for damages or injuries caused by
inappropriate handling / use / installation of the product.
1.
Make sure to perform connections when the vehicle engine is turned off.
2. Protect this device from water, humidity and other liquids. Avoid using/storing
it in extreme temperatures. Do not expose this product to direct sunlight, heat
sources, or use near strong magnetic fields. Do not handle this appliance with
wet hands.
3. It is suggested that all connections and mounting should be carried out by
qualified personnel.
4. Make sure all the connections are executed in a proper manner. Reversed
connection will cause short circuit and damage.
5.
Keep away from flammable materials!
6. Do not attempt to repair this appliance yourself. In case of damage, contact
authorized service point for check-up/repair.
7.
Any modifications on the vehicle in order to mount this device or any other
components have to be performed in a way that do not threaten security nor
stability of the vehicle.
8. It is forbidden to mount any components near air bags!
9. In case of any doubts concerning place of installation, contact your vehicle’s
dealer. Before drilling the holes in vehicle’s body, make sure it will not damage
any electrical cables, brake system, fuel tank etc. During installation keep in
mind, that any loose parts may pose danger in case of an accident – make sure
to install every piece properly to ensure safety.
Safe driving
Keep in mind that responsibility for safety while operating a vehicle is solely on the
driver of the vehicle. The camera is intended as a supplement tool and CANNOT
be considered as a device dismissing the driver from cautious vehicle operation.
It is intended to assist in safe driving. The device monitors area behind the vehicle
and allows for keeping safe distance from obstacles, but does NOT allow for not
exercising special caution while driving! The producer of this device does not claim
liability for any misuse of the product nor damages or accidents resulting from failure
to observe these precautions or safety instructions.
instructions and safety measures
1. Pay special care when reversing – slow down to minimum to avoid hitting the
obstacle.
2.
Avoid flattening, cutting, damaging the insulation, extending the cables – it may
negatively affect their operation.
