Peiying PY-DVR009, Руководство пользователя

Страница: 13 / 40

Owner’s manual
13
EN
Note: Place the cable in a way, that it does not disturb the
driver while driving.
Rear camera:
Before installation, choose the correct place for mounting.
Mounting place has to be installed in a way, that it does not
obstruct field of view. Rear camera can be installed in two ways:
• On mounting tape. Peel off first piece of paper from the
tape and stick it to the camera's mounting bracket. Peel
off second piece of paper from the tape and stick the
camera do selected place.
• On screws. Drill the holes in selected place and screw in
the camera. During drilling make sure, that no damage is
done to any wire, especially for safety systems.
After connecting the 3,5 mm plug to the AV socket in the
dashcam, the view from rear camera will appear in the top
left corner of the display. If red wire will be connected to the
reversing lights (for example with quick connector), after
shifting into reverse gear, the view from rear camera will be
enlarged, helping the driver with maneuvering the vehicle.
Note: for this function to work, the red wire has to be
connected to the same electrical installation.
MicroSD card installation
1. Place the microSD card in the proper slot of the device
and press gently, until it clicks. Make sure, that the card is
installed in correct way.
2. To take out the card, press it gently. When the card slides
out of the slot, take it out.