Temperature compensation offset
(toF)
terrier i-temp
measures the temperature at the
location of the radiator, but other parts of the room
may be warmer or colder. To compensate for this, you
can set a temperature offset of ±3.5°C. If, for example,
terrier i-temp
is set to 20°C and a temperature of
18°C is measured elsewhere in the room, an offset of
-2.0°C should be configured.
HOW?
Press and hold down “MENU” for more than
3 seconds. Use the thumb wheel to select the “tOF”
menu item. Confirm with “OK”. Use the thumb wheel to
modify the temperature (offset). Press “OK” to confirm.
Temperature limitation (tLi)
This is used in situations where you may want to limit
the maximum temperature that can be set for a
particular room.
HOW?
1
Hold “MENU” for 3 seconds until “Pro” appears
2
Use thumb wheel to scroll to “reS”
3
Hold “MENU” and
at the same time
4
“tLI” will appear, adjust maximum temperature
to your choice.
Restore factory settings
You can reset the actuator to its initial state
manually. This will clear all the settings that
have been made manually.
HOW?
Press and hold down “MENU” for more than 3
seconds. Use the setting thumb wheel to select
the “reS” menu item. “ACC” will appear.
Confirm with “OK”.
Advance setting options
24
25