Pegatron GM1670, Руководство пользователя

Страница: 6 / 29

2.1.3 Front Panel and LEDs
The faceplate of Gigabit Network Adapter has 2 LEDs: Link, and Act. Figure
2.1 shows the faceplate of Gigabit Ethernet adapter. Table 2.1 explains the
function and state of the LEDs.
Figure 2.1 Faceplate of Gigabit Network Adapter
Table 2.1 Functions and State of the LEDs
LED Color Description
Link Green Lights to indicate a functional network link through the port.
Act Yellow Blinks to indicate date has been sending and receiving via
the port.
2.2 Installing the Gigabit Network Adapter
2.2.1 Before You Begin
Before installing your Gigabit Network Adapter, be sure your computer meets
the requirements discussed in Section 1.2 Verifying Your System
Requirements ; then do the following:
1. If your computer is on, turn it off.
2. Remove all cords from the computer and all attached devices.
3. Hold the adapter card by the edges and remove it from its shipping
package.
4. Check the adapter for any visible sign of damage, particularly on the edge
connector adapter.
Note: Do not attempt to install a damaged adapter. If the adapter is damaged,
contact the place of purchase. Be sure to carry your proof of purchase with
you.
6