Pegasus bulls-i ETK-B3600, Руководство пользователя

Страница: 17 / 51

17
2. Installation
2-2 bulls-i Installation
Check the installation site and have everything in place. Refer to
►
Page 3 for installation precautions.
This device must be installed on the central axis of the vehicle and on the upper portion of the windshield in
order to achieve optimal recording performance.
► ►
1
Clean the front and rear
windshields using a clean piece
of cloth.
2
Remove the protective film from
the strip of double-sided tape
attached to the mount.
3
Attach the mount flush to the
windshield.
► ►
4
Insert the microSD card all the
way inside the bulls-i's microSD
card slot until it clicks in.
5
Attach the bulls-i to the mount.
6
Remove the protective film
from the strip of two-sided tape
attached to the rear camera.
A warning message will appear if the microSD card has been incorrectly inserted or cannot be read.